Bark Sunday Evening Net /Statewide Linking Net

The Bark local net will be Sunday evenings at 7:45PM on the 2 meter repeater at 146.1+ MHz (PL=114.8 Hz). Anyone is welcomed to check into the net. The Bark net will be followed by the Statewide Linking Net on the 70 centimeter repeater, 444.1+ MHz (PL=100 Hz) at 8:30PM.

Follow the link below to download the Net Control script:

Net Control Script


Posted under Local HAM Comments

This post was written by Joe Seibert on June 6, 2015

Tags: , , ,

Bark 70 Centimeter Repeater Back on air!

As of Wednesday at 2PM the Bark 70 centimeter repeater is back on the air. The input frequency is 449.1 MHz, ouput frequency is 444.1 MHz with a 100 Hz PL tone.

The repeater will disconnect from IRLP between 12 midnight and 6 AM. It will automatically connect to the following nets:

AK Morning Net-Node 9109- 8:45 AM- 11AM M-F

Insomniac Net-Node 9100- 9:50 PM – 11:30PM Daily

At one time we had the Say Good Morning Net, node 9668, from 7:30-8:30 AM every morning generic viagra cheap. I can bring this back if anyone wants it.

Posted under Local HAM Comments

This post was written by Joe Seibert on May 13, 2015

Tags: , , ,

KL3MO adds new EchoLink and IRLP coverage in Kasayuli Sub.


KL3MO  has added both an EchoLink and IRLP to the existing APRS Gateway in Kasayuli Subdivision.  Both nodes are powered by a Nano Node with a full time IRLP/EchoLink connection. Both the EchoLink and IRLP node numbers are 7599.

EchoLink Node: 7599
IRLP Node: 7599
Input/Output frequency{Simplex}: 446.875 MHz
CTCSS Tone: 100 Hz
Power output: 50 watts
Radio: Kenwood TM-D710A {A-Side}
Antenna: Vertical, omni-directional, 7 dbi gain, at 25 feet
60.770333, -161.878167
N 60° 46.22 W 161° 52.69

In addition to the matched set of EchoLink/IRLP nodes KL3MO maintains a full time APRS Gateway on 144.39MHz {B-Side} buy generic viagra online india.

To initiate a call on IRLP simply key up and then enter the four digit node number you wish to connect to. For example, to call the Alaska Gateway key up and press “9109″. The node will announce that you are connected after about ten seconds. To disconnect key up and press “73″  To initiate a call on EchoLink prefix the node with a #  so to connect to AL7YK-R you would need to dial #14610.

00 Connect to 9100 Win System Reflector (9100)
01 Connect to BARK EchoLink (#14610)
02 Connect to BARK IRLP (3465)
09 Connect to Alaska Channel (9109)
Feature Codes:

4# Current Date and Time

5# Current Bethel Airport Weather
73 Disconnect from remote node

Posted under Local HAM Comments

This post was written by kl3mo on March 4, 2015